PRIMITIVE PRODUCT
PAGES

   Primitive Home

   Body Kits

   Cockpit & Misc.

   Engine & Exhaust

   Lighting

   Safety Equipment

   Skidplates

   Suspension

   Used Parts!
         

   Wheels & Brakes

   Wings and Spoilers

PRIMITIVE
RACING

   Racing News

   About Primitive
         Racing & Paul
          Eklund


   The Primitive
         Rally Cars


   Our Sponsors


 

OUTBACK

Have Questions? Email us HERE!
2010-2014 Outback 2.5i/3.6R/FB25

Outback Front Skidplate (all models)

This 3/16" T5052 aircraft aluminum skidplate was developed specifically for the 2010 and newer Legacy and Outback platform.  Not only does it protect the engine, sump, and exhaust headers over ROUGH and GRAVEL roads, but includes vents to draw out more hot air and smooth the front end aerodynamics.  Note the tight fit to give the BEST ground clearance, while still remaining SIMPLE to install.  Takes just a couple of minutes with 3 bolts and 2 push-on clips. Great for backwoods trails, the desert, TSD gravel rallies and off-road travel. Simple installation. Mounting hardware included.            

1/8" $199

3/16" $239

Extras and add-ons:  add a 4" oil filter access hole for $20

Fumoto Valve for FB Engines

For all you FB owners now we offer a single drain hole + Fumoto valve for extra ease with oil changes. These have a nipple on the end for a drain hose to keep down the mess.  Valve opens by HAND, no tools needed to make quick and easy to drain.

Valve only - $33.95 or combo that up with a drain hole for only $49

 

Outback CVT Transmission Skidplate

Primitive is proud to announce our new, CVT tranny protector.  This nice, lightweight plate bolts on easily and provides that big, exposed CVT tranny under pan an extra layer of protection, while providing vented aluminum that draws away hot air, acting as an additional heat sink.  This fits the 2010-11 Outbacks with EJ25 motor.  For 12-14 Outbacks with FB25 motor and version 2 CVT we offer the 3/16" mid-armor.

1/8" $99

5EAT/CVT/6MT Primitive MID-ARMOR 3/16" aluminum Transmission Skidplate

For rugged protection of the transmission area on all 2010-14 Outbacks, we now offer the tough, 3/16" Aluminum Primitive MID-ARMOR.  This skidplate bolts on with the hardware pack that we provide, and covers the middle portion of your Outback and will protected the transmission, whether you are rocking a CVT, a 5EAT or even the 6MT manual trans.  Bolts on in minutes, no drilling required.

$135 (or much less when bought with a front or rear plate in our Full Body Armor or TRIPLE ARMOR options!)

 

Outback 2.5i/XT Rear Skidplate

Primitive is proud to offer the ONLY rear skidplate on the market for 2005-09 Legacy GT's and Outback XT's!! Our custom design uses all your stock mounting points for easy install and is made with the same 3/16" aircraft aluminum as our other heavy duty skidplates.  You can jack up the car under this!

 
$110 (or much less when bought with a front plate in our Full Body Armor option! below)

Outback 3.6R H6 Rear Skidplate

Primitive is proud to offer the ONLY rear skidplate on the market for 2010-13 Outback 3.6r's Our custom design uses all your stock mounting points for easy install and is made with the same 3/16" aircraft aluminum as our other heavy duty skidplates.  You can jack up the car under this!

 $110 (or much less when bought with a front plate in our Full Body Armor option! below)


Full Body Armor and TRIPLE ARMOR Kits

Includes our Front and Rear Skidplate for total protection for your underbody!

Full Armor: 1/8" Front + 3/16" rear - Less 10% combo discount

Ultra Armor: 3/16" front + 3/16" rear - Less 10% combo discount

TRIPLE ARMOR!   Add a CVT/5EAT plate to any combo and receive 15% Triple Armor discount!

2005-2009 Outback (all models)

Outback 3.0EZ H6 Front Skidplate

This aluminum sport skidplate, like the ones featured above, protects the engine, sump and exhaust headers over ROUGH and GRAVEL roads. Also great for TSD rallies and off- road travel. Simple installation. Mounting hardware included. Fits all H6 Subaru Outbacks.  3/16" thickness only.       

 

 3/16" $249

Outback 2.5i + OBXT Front Skidplates

This aluminum sport skidplate, like all of PRIMITIVE's front skidplates, protects the engine, sump and exhaust headers over ROUGH and GRAVEL roads. Also great for TSD rallies, and off- road travel. Simple installation, bolts on easily with no drilling.   Mounting hardware is included.          

 

1/8" light duty, lightweight aluminum:  $199  (good for snow, mud, brush and light gravel) approx 14lbs

3/16" rugged duty aluminum, approx 17lbs   $239

Extras and add-ons:  add a 4" oil filter access hole for $20;  add $18 if you are running aftermarket headers. (custom spacers required)  

Outback 2.5i/XT Rear Skidplate

Primitive is proud to offer the ONLY rear skidplate on the market for 2005-09 Legacy GT's and Outback XT's!! Our custom design uses all your stock mounting points for easy install and is made with the same 3/16" aircraft aluminum as our other heavy duty skidplates.  You can jack up the car under this!

 
$110 (or much less when bought with a front plate in our Full Body Armor option! below)

4EAT Automatic Transmission Skidplate  (for base models, not OBXT or H6)

We now offer protection for you 4EAT owners! No longer do you stay awake at night worrying about bashing your auto tranny on that rock or branch the next time you're exploring the outdoors. Rest easy and Get Primitive!   (sorry, we do not yet have one for OBXT and H6 owners with the paddle shifting 5EAT auto trans....)

 

Outback EZ30  H6 Rear Differential Skidplate

Primitive is proud to offer the ONLY rear skidplate on the market for 2005-09 Outback 6 cylinder's with a SIDE DRAIN rear differential.  Our design uses all your stock mounting points for easy install and is made with the same 3/16" aircraft aluminum as our other heavy duty skidplates.  You can jack up the car with this rugged differential protector!

 $110 (or much less when bought with a front plate in our Full Body Armor option! below)


Full Body Armor Kits

Includes our Front and Rear Skidplate for superior protection for your underbody!

Full Armor: 1/8" Front + 3/16" rear - Less 10% combo discount

Ultra Armor: 3/16" front + 3/16" rear - Less 10% combo discount

 

2000 - 2004 Outback 2.5i & 3.0 + 3.3

Outback Front Skidplate - H6 6-cylinder models

This sturdy skidplate bolts on easily in place of the factory piece of plastic; you get excellent protection from anything trying to hurt your motor, manifold, oil pan or filter. The aluminum plate features full protection out to the frame rails on each side and extends back beyond the rear of the sub-frame. Designed to maximize ground clearance and to install quickly... a rear lip keeps the plate from hanging up when you reverse. Available in 1/8" for light duty/snow or 3/16" for heavy duty/rallycross/back roads.

3/16"  $249

Outback Front Skidplate - 2.5i

This sturdy skidplate bolts on easily in place of the factory piece of plastic; you get excellent protection from anything trying to hurt your motor, manifold, oil pan or filter. The aluminum plate features full protection out to the frame rails on each side and extends back beyond the rear of the sub-frame. Designed to maximize ground clearance and to install quickly... a rear lip keeps the plate from hanging up when you reverse. Available in 1/8" for light duty/snow or 3/16" for heavy duty/rallycross/back roads.

1/8"  $199

3/16"  $239

Extras and add-ons:  add a 4" oil filter access hole for $20; add $18 if you are running aftermarket headers. (custom spacers required)  

4EAT Automatic Transmission Skidplate

We now offer protection for you 4EAT owners! No longer do you stay awake at night worrying about bashing your auto tranny on that rock or branch the next time you're exploring the outdoors. Rest easy and Get Primitive!

 

NOTE: Some models require removing the corner of the plate for exhaust clearance, but we've pre-scored the plate for easy modification.

$139 (or much less when bought with a front plate in our Full Body Armor option!)

Outback Rear Skidplate (all models)  4 cyl and 6 cyl Auto and 5MT models

Off-road tough and ready for abuse! This rear differential skidplate fits the 3rd generation of Legacy's with the multi-link rear suspension. Made from aircraft grade aluminum and TIG welded for strength, this plate will take anything you throw at it and say "thank you, can I have some more"!


$110 (or much less when bought with a front plate in our Full Body Armor option!)


Full Body Armor Kits

Includes our Front and Rear Skidplate for total protection for your underbody!

Full Armor: 1/8" Front + 3/16" rear - Less 10% combo discount

Ultra Armor: 3/16" front + 3/16" rear - Less 10% combo discount

Add a 4EAT plate to any combo and receive 15% Triple Armor discount!

 

1996 - 1999 Outback

Outback Front Skidplate

This sturdy skidplate bolts on easily in place of the factory piece of plastic; you get excellent protection from anything trying to hurt your motor, manifold, oil pan or filter. The aluminum plate features full protection out to the frame rails on each side and extends back beyond the rear of the sub-frame. Designed to maximize ground clearance and to install quickly... a rear lip keeps the plate from hanging up when you reverse. Available in 1/8" for light duty/snow or 3/16" for heavy duty/rallycross.

1/8"  $199

3/16"  $239

Extras and add-ons:  add a 4" oil filter access hole for $20; add $18 if you are running aftermarket headers. (custom spacers required)

4EAT Transmission Skidplate

We now offer protection for you 4EAT owners 1998-99! No longer do you stay awake at night worrying about bashing your auto tranny on that rock or branch the next time you're exploring the outdoors. Rest easy and Get Primitive!

 

NOTE: Some models require removing the corner of the plate for exhaust clearance, but we've pre-scored the plate for easy modification.

$139 (or much less when bought with a front plate in our Full Body Armor option!)

 

Outback Rear Skidplate

Stage rally proven! This skidplate is one strong mutha! Primitive's custom differential cover is computer-formed from 3/16" aluminum and TIG welded for strength. Strong enough to jack your car up with, we do! Comes with mounting hardware, of course.



$100 (or much less when bought with a front plate in our Full Body Armor option!)

Primitive Racing Mini Rear Skidplate

You want some protection under that rear differential, but you don't beat your car up like those crazy Pro-Rally guys do?  Maybe you have a big bore aftermarket exhaust with a big 'ol flange next to the rear diff. Then this mini-skidplate is for you! It bolts on in minutes and will help deflect that unseen rock away from your rear diff housing. Made of 1/8 thick aircraft-grade aluminum and stainless steel.

$75 (or much less when bought with a front plate in our Full Body Armor option!)


Full Body Armor Kits

Includes our Front and Rear Skidplate for total protection for your underbody!

Street Armor: 1/8" front + 1/8" mini rear - Less 10% combo discount

Full Armor: 1/8" Front + 3/16" rear - Less 10% combo discount 

Reverse Armor: 3/16" front + 1/8" mini rear - Less 10% combo discount

Ultra Armor: 3/16" front + 3/16"rear - Less 10% combo discount 

Add a 4EAT plate to any combo and receive 15% Triple Armor discount!

 

Got a question? Want to order?
Email us today!